CW34 Pneumatic Roller
Pneumatic Rollers
Details
Operating Weight - Standard Machine Empty
22050 lb
Operating Weight - Maximum Ballast
59525 lb
Compaction Width
82 in
Overview
Versatile. Flexible. Productive.
The CW34 is an eight wheel pneumatic roller that features a modular ballast system and flexible operating weight of 10 000 kg to 27 000 kg (22,050 lb - 59,525 lb). This machine offers excellent visibility, ECO-mode operation, even compaction, and excels on a variety of materials due to its flexible air-on-the-run capability.
Features at a Glance
- Versatile Compaction Performance
-
Compaction Width
Eight 13/80 R20 rubber tires provide overall compaction width of 2090 mm (82") with 25 mm (1") overlap.Flexible Ballast
Ballast options include modular and non-modular steel, sand, and water. The 6.5 metric ton (7.1 U.S. ton) modular steel can be easily added or removed through bolt-on side panels. The internal, non-modular steel consists of 6.1 metric tons (6.7 U.S. ton). Also, a 3 cubic meter (793 gal) water-tight chamber with baffled compartments prevent surge, and balance weight.Oscillating Tires
Oscillating front and rear tires deliver vertical and horizontal forces that reduce air voids, providing surface uniformity. Heat retention covers trap heat to keep the tires warm and prevent pick-up. They can be easily stored when not in use.Air-on-the-Run
The 13/80 R20 rubber tires can be equipped with the optional air-on-the-run system that enables the operator to quickly adjust tire pressures to increase or decrease static loads for optimal surface quality.
- Exceptional Visibility and Control
-
Operating Environment
The sliding and pivoting operator station rotates 90° to either side for ultimate comfort and control. The new console design includes an LCD display and push button machine controls that simplify operation for an all-around comfortable operating environment.
- Cat® Compaction Control
-
Dual Infrared Temperature Sensors
Dual infra-red sensors mounted on the front and rear of the machine deliver real-time readings that keep the operator informed of when to begin rolling and when to stop. This system helps operators avoid tender-zones that often occur in the 104º-110º C (219º-230º F) temperature range.Pass-Count Mapping
Pass-count mapping helps operators achieve target density and increase roller efficiency. The system records and monitors pass patterns in order to display coverage. The system also helps operators optimize drum overlap, simplify nighttime operation, eliminate second guessing and prevent incomplete passes such as stopping short.Temperature Mapping
Temperature mapping provides a visual readout of mat temperature in order to keep the machine in the proper temperature range. The system records and monitors temperature for future analysis of the proper temperature range.
- Smooth Operating Powertrain
-
C4.4 Engine
The C4.4 engine meets U.S. EPA Tier 4 Interim and EU Stage IIIB emission standards and provides 98 kW (133.2 metric hp).ECO-mode
Standard ECO-mode provides fuel efficiency and reduces sound levels.
Specifications
Full Specifications
- Weights
-
Operating Weight - Standard Machine Empty
22050 lbOperating Weight - Maximum Ballast
59525 lbOperating Weight - Maximum Wet Sand Ballast
35275 lbAverage Weight per Wheel
3571 lbOperating Weight - No Ballast
22050 lbOperating Weight - Maximum Water Ballast
28660 lbAverage Weight per Wheel - No Ballast
2755 lbAverage Weight per Wheel - Maximum Ballast
7451 lb
- Operating Specifications
-
Compaction Width
82 inTurning Radius - Inside (2)
20.0 ftRolling Width
82.0 inTurning Radius - Outside
342 inGround Clearance
10 inTravel Speed - Maximum
12 mile/hTurning Radius - Inside (1)
240 inNumber of Wheels
8
- Engine
-
Bore
4.13 inStroke
5.0 inGross Power
133 HPEngine Model
C4.4
- Dimensions
-
Overall Width
85 inHeight - Steering Wheel
96 inHeight - ROPS
118 inOverall Length
210 inMaximum Machine Height
118 in
- Tires
-
Tires
13/80 R20
- Service Refill Capacities
-
Water Spray Tank Capacity
100 gal (US)Fuel Tank Capacity
71 gal (US)