637K Wheel Tractor – Coal Bowl Scraper
Coal Bowl Scrapers
Details
Flywheel Power - Tractor/Scraper
425 kW (570 hp)/216 kW (290 hp)
Scraper Capacity - Heaped
50 yd³
Top Speed - Loaded
34.7 mile/h
Overview
Haul More Coal
637 coal bowls are longer and higher than standard wheel tractor scraper bowls, allowing them to haul 38 m (50 yd) of low density loose coal. The bowls are designed and built to specifically deliver in coming loose coal to the stock pile and reserve stock piled coal to the feeder system.
Benefits
None
Ergonomic controls and a newly redesigned cab interior provide a more comfortable and efficient working environment all day long
More Productivity
Improvements in fuel efficiency and the new APECS transmission controls deliver more productivity in most applications
None
New safety features help operators be more productive and work more efficiently all day long
Features at a Glance
- Be More Productive
-
Be More Productive
• Up to 12% improvement in productivity.
• Large size capacity coal scraper bowl to accommodate low density loose coal.
• Advanced productivity electronic control system (APECS) allows
the engine and transmission to communicate on a high level. This
communication allows the machine to better utilize the power and torque the engine is producing. The net result is moving more material.
• Use ground speed control to set the desired top speed and the machine will find the gear that works best for the engine and the transmission, providing a lower fuel burn.
• The machine speed limit feature replaces top gear selection, allowing the machine to find the correct gear that works best for the engine and transmission. Pulling the load in the correct gear, in most cases, results in lower engine load factor and lower fuel burn.
• Auto-stall assists in quickly bringing the transmission to an operating temperature at startup when the machine is working in a cold climate region.
• Cat Payload Estimator for scrapers is an earthmoving solution for optimal payload and jobsite efficiency. Payload Estimator achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Payload Estimator is optimized to be used with sequence assist, which provides increased productivity with
less operator effort. Payload Estimator is an automatic feature when ordered with sequence assist.
- Work in Comfort
-
Work in Comfort
• Reduce up to 14 individual operator commands per cycle with sequence assist (optional attachment).
• Steer with less effort using the newly designed high-pressure steering system.
• Enjoy interior improvements and a more ergonomic work environment with a 21% larger cab than the G Series cab.
• Intuitive, ergonomic controls keep operators focused on their work.
• Maintain desired cab temperature with automatic temperature control.
- Designed for Safety
-
Designed for Safety
• Get in and out of the cab easier with the new powered access ladder system (optional attachment).
• Enhance an operator’s awareness of site surroundings with the optional work area vision system (WAVS).
• Seat belt indicator provides visual and audible alerts when the seat belt is not in use.
• Advanced cushion hitch allows the cushion hitch to prevent end stroke by having the ability to predict end stroke events and manage the rate of dampening, resulting in reduced hitch maintenance and improved operator ride in rough conditions.
• Easy ground level access to fuel, water, and engine oil.
- Easy to Operate
-
Easy to Operate
• The spacious cab features easy, intuitive controls and excellent
visibility. The cab provides a comfortable working environment for all-day operations.
• Cat advanced ride management (ARM) seat suspension reduces end stroke movement of the load cylinder for a smoother ride.
• Engine Overspeed protection will automatically engage with no operator input when the machine is in eighth gear. The machine will assist in slowing the machine's speed by canceling the throttle command and engaging the engine compression brake.
- Integrated Cat Technologies
-
Integrated Cat Technologies
• Monitor, manage, and enhance job site operations.
• Hit target grade faster and more accurately with Cat Grade technologies. Finish jobs in fewer passes and with less operator effort, saving you time and helping to increase profit.
• Product Link™ collects machine data that can be viewed online through web and mobile applications (optional attachment).
• Access information anytime, anywhere with VisionLink® – use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your job site.
• Shorten the learning curve for inexperienced operators with load
assist (optional attachment).
- Execute Efficiency
-
Execute Efficiency
• The new tractor hydraulic on-demand fan helps assist in lowering fuel consumption.
• Cat Grade Control (optional attachment) intelligently ensures the machine does not cut below grade in a cut area or overfill in the fill area.
Specifications
Full Specifications
- Engine
-
Flywheel Power - Tractor/Scraper
425 kW (570 hp)/216 kW (290 hp)
- Operating Specifications
-
Scraper Capacity - Heaped
50 yd³Top Speed - Loaded
34.7 mile/h
- General
-
Width - Cut
11.5 ftFlywheel Power - Tractor
570 HPOverall Width
12.93 ftScraper Capacity - Heaped
50 yd³Rated Engine RPM - Scraper
2150 r/minTires - Scraper
37.25R35**E3Top Speed - Loaded
34.7 mile/hOverall Length
609.5 inOperating Weight - Empty
117782 lbTires - Tractor
37.25R35**E3Flywheel Power - Scraper
290 HPEmissions
Cat C9.3 and Cat C18 engines meet U.S. EPA Tier 4 Final/EU Stage IV engine emission standards.180° Curb-to-Curb Turning Width
42.59 ftEngine Model - Tractor
Cat C18Engine Model - Scraper
Cat C9.3Scraper Capacity - Struck
41 yd³Rated Engine RPM - Tractor
1900 r/minRated Load
34 472 kg (76,000 lb)/34.20 tonnes (38 tons)Fuel Tank Refill Capacity - Scraper
370 gal (US)Maximum Depth of Cut
17.7 inMaximum Depth of Spread
21.1 inOverall Shipping Height
13.62 ft
- Implement Cycle Times
-
Bail Lower
2.1 sBowl Raise
3.5 sEjector Extend
8.5 sApron Raise
4 sApron Lower
3.8 sBail Raise
1.5 sBowl Lower
3.5 sEjector Retract
8.5 s
- Cab
-
Exterior Sound Power Level
The exterior sound power level for the standard machine (ISO 6393:2008) is 118 dB(A).ROPS/FOPS
Meet ISO standards
- Dimensions
-
Width - Overall Machine
155 inHeight - Overall Shipping
163 inLength - Overall Machine - Standard
609.5 inHeight - Top of Cab
147 inRear Axle - Rear of Machine
95.4 inWidth - Inside of Bowl
134 inWidth - Rear Tire Centers
96.9 inWidth - Outside Rear Tires
143.2 inHeight - Scraper Blade Maximum
21.2 inAxle to Vertical Hitch Pin
20 inGround Clearance - Tractor
26.1 inWidth - Tractor
137.8 inFront of Tractor to Front Axle
142.2 inWheel Base
377 in
- Safety Criteria Compliance Standards
-
Seat Belt
SAE J386:FEB2006Reverse Alarm
ISO 9533:2010Falling Object Protective Structure (FOPS)
ISO 3449:2005 Level IIBrakes
ISO 3450:2011Rollover Protection Structure (ROPS)
ISO 3471:2008 for up to 21 282 kg (46,919 lb)Steering System
ISO 5010:2007
- Service Refill Capacities
-
Transmission System - Scraper
12.9 gal (US)Diesel Exhaust Fluid - Tractor
8 gal (US)Diesel Exhaust Fluid - Scraper
5.8 gal (US)Crankcase - Scraper
6.5 gal (US)Cooling System - Scraper
16.1 gal (US)Fuel Tank
370 gal (US)Transmission System - Tractor
29 gal (US)Cooling System - Tractor
19.8 gal (US)Hydraulic System
37.5 gal (US)Crankcase - Tractor
13.7 gal (US)
- Travel Speeds - Runout
-
Transmission Gear - Reverse
6.2 mile/hTransmission Gear - Sixth
19 mile/hTransmission Gear - Fourth
10.5 mile/hTransmission Gear - First
3.4 mile/hTransmission Gear - Seventh
25.7 mile/hTransmission Gear - Third
7.7 mile/hTransmission Gear - Fifth
14.1 mile/hTransmission Gear - Eighth
34.7 mile/hTransmission Gear - Second
6.2 mile/h
Equipment
- Standard Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
POWER TRAIN – TRACTOR
- Cat C18 engine with MEUI™
- Compression engine brake
- Electric start, 24V
- Air cleaner, dry type with precleaner
- Fan, hydraulic
- Ground level engine shutdown
- Radiator, aluminum unit core, 9 fins per inch
- Guard, crankcase
- Starting aid, ether
- Braking system:
- Primary and secondary, wet disc, hydraulic actuated
- Parking, hydraulic-released, spring-applied
- Throttle lock
- Transmission:
- 8-speed planetary power shift
- ECPC control
- APECS software
- Programmable top gear selection
- Transmission hold
- Differential lock
- Guard, power train
- Standard tire spin reduction
- Ground speed control
- Machine speed limit
- Differential lock protection
POWER TRAIN – SCRAPER
- Cat C9.3 engine
- High pressure common rail fuel
- Constant lift engine brake
- Electric start, 24V
- Air cleaner, dry type with precleaner
- Fan, mechanical driven
- Ground level engine shutdown
- Radiator, aluminum unit core, 9 fins per inch
- Starting aid, either
- Braking system:
- Primary and secondary, dry caliper, hydraulic actuated
- Transmission:
- 4-speed (torque converter drive)
- Planetary power shift
ELECTRICAL – TRACTOR
- Alternator, 150 Amp
- Batteries (4), 12V, 1,000 CCA, maintenance free, high output
- Electrical system, 24V
- Lighting system:
- Headlights, LED
- Turn signals with hazard function, LED floodlights, (2) cutting edge (1) bowl, halogen side vision (2)
- Starting/charging receptacle
ELECTRICAL – SCRAPER
- Alarm, backup
- Batteries (4) 12V, 1,000 CAA, maintenance free, high output
- Alternator, 65 Amp
- Electrical system, 24V
- Lighting system:
- Brake lights, LED
- Turn signals with hazard function, LED
OPERATOR ENVIRONMENT – TRACTOR
- HVAC system, heat, AC, defrost
- Thermostat control of HVAC system
- Coat hook
- Lunchbox platform with holding strap
- Diagnostic connection (2)
- 12V power ports (2)
- Differential lock (1)
- Dome courtesy light
- Horn, electric
- T-handle implement control
- Mirror, rearview
- Radio ready
- ROPS/FOPS cab, pressurized
- Keypad switches:
- Throttle lock
- Wipers/washers
- Hazard lights
- Retarding level select
- Work lights on, off
- Information mode on Messenger Display
- Safety tab rocker switches
- Seat belt, static two-piece
- Seat, Cat Advanced Ride Management (ARM), Cat Comfort Series 3, rotates 30 degrees
- Steering wheel, tilt, telescoping, padded
- Windows, right side emergency egress
- Windows, sliding
- Windows, laminated, zipped in
- Windshield wipers, front and rear windows, includes washers
- Door lock
- Messenger Display
- Gauges, warnings include:
- Coolant temperature
- Engine oil temperature
- Hydraulic oil temperature
- Fuel level
- Park brake
- Implement lockout
- Brake system
- Throttle lock
- System voltage
- Secondary steering
- Bail down
- Ejector auto
- Differential lock
- Apron float
- Transmission hold
- Cushion hitch
- High beam lights
- Action lamp
- Engine speed, rpm
- Gear selection
FLUIDS
- Extended Life Coolant to –37° C (–34° F)
OTHER STANDARD EQUIPMENT – TRACTOR
- Advanced cushion hitch
- Accumulators (cushion hitch) with Canadian Registration Number (CRN)
- Fast oil change
- Fenders, non-metallic
- Heater, engine coolant 120V
- Rims (2)
- Tow hooks, front
- Vandalism locks
- Heater, engine coolant 120V
- Steering locks
OTHER STANDARD EQUIPMENT – SCRAPER
- Coal Bowl
- 31 m3 (41 yd3), struck
- 38 m3 (50 yd3), heaped
- Vandalism locks
- Scraper fenders
- Fast oil change
- Rims (2)
- Hydraulic position sensing cylinders (bowl lift and apron)
- Optional Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
STEERING ARRANGEMENTS
- Secondary Steering Arrangement
INTEGRATED TECHNOLOGIES
- Sequence Assist Arrangement
- Advanced Tire Spin Reduction
OTHER ATTACHMENTS
- Camera arrangement – WAVS
- Cab beacon
- Air horn
- Air horn and beacon
- Wiring group
SERVICE INSTRUCTIONS
- Film arrangement – U.S. (ANSI)
- Film arrangement – International (ISO)