623 Wheel Tractor-Scraper
Elevating Scrapers
Details
Flywheel Power - Tractor/Scraper
304 kW (407 hp)
Scraper Capacity - Heaped
23.0 yd³
Top Speed - Loaded
33.5 mile/h
Overview
One machine team
Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing Cat Wheel Tractor-Scrapers to consistently deliver high productivity at the lowest cost per ton.
Benefits
None
Ergonomic controls and a newly redesigned cab interior provide a more comfortable and efficient working environment all day long
More Elevator Torque
A stronger elevator structure reduces chain wear and improves available torque
None
New safety features help operators be more productive and work more efficiently all day long
Features at a Glance
- BE MORE PRODUCTIVE
-
BE MORE PRODUCTIVE
- Up to 7% additional elevator torque.
- Up to 50% improvement in chain life.
- Enhanced elevator drive sprocket for reduced chain wear.Improved scissor-style chain tension system for decreased
sprocket wear, chain wear, and chain jumping. - Cat C13 engine offers increased power density with a combination
of proven electronic, fuel, and air systems. - Use Ground Speed Control to set the desired top speed, and the
machine will find the gear that works best for the engine and the
transmission, providing a lower fuel burn.
• The Machine Speed Limit feature replaces Top Gear Selection. - Advanced Productivity Electronic Control System (APECS) allows
the engine and transmission to communicate on a high level. This
communication allows the machine to better utilize the power
and torque the engine is producing. The net result is moving more
material. - Auto-Stall assists in quickly bringing the transmission to an
operating temperature at start-up when the machine is working in a
cold climate region. - Cat Payload Estimator for scrapers is an earthmoving solution for
optimal payload and jobsite efficiency. Payload Estimator achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Payload Estimator is optimized to be used with Sequence Assist, which provides increased productivity with less operator effort.
- WORK IN COMFORT
-
WORK IN COMFORT
- Reduce up to 14 individual operator commands per cycle with
Sequence Assist (optional attachment). - Steer with less effort using the newly designed high-pressure
steering system. - Enjoy interior improvements and a more ergonomic work
environment with a 21% larger cab than the G Series cab. - Intuitive, ergonomic controls keep operators focused on their work.
- Maintain desired cab temperature with automatic temperature
control.
- Reduce up to 14 individual operator commands per cycle with
- DESIGNED FOR SAFETY
-
DESIGNED FOR SAFETY
- Brakes are hydraulically actuated wet disc brakes for the tractor
and scraper. - Get in and out of the cab easier with the new powered access
ladder system (optional attachment). - Enhance an operator’s awareness of site surroundings with the
optional Work Area Vision System (WAVS). - Seat belt indicator provides visual and audible alerts when the seat
belt is not in use. - Ground level, engine shut-off switch stops all fuel to the engine
when activated and shuts down the machine. - Advanced Cushion Hitch allows the cushion hitch to prevent
end stroke by having the ability to predict end stroke events
and manage the rate of dampening, resulting in reduced hitch
maintenance and improved operator ride in rough conditions.
- Brakes are hydraulically actuated wet disc brakes for the tractor
- EASY TO OPERATE
-
EASY TO OPERATE
- The spacious cab features easy, intuitive controls and excellent
visibility. The cab provides a comfortable working environment for
all-day operation. - Cat Advanced Ride Management (ARM) seat suspension reduces
end stroke movement of the load cylinder for a smoother ride. - Engine overspeed protection will automatically engage with no
operator input when the machine is in eighth gear. The machine
will assist in slowing the machine speed by canceling the throttle
command and engaging the engine compression brake.
- The spacious cab features easy, intuitive controls and excellent
- INTEGRATED CAT TECHNOLOGIES
-
INTEGRATED CAT TECHNOLOGIES
- Monitor, manage, and enhance jobsite operations.
- Hit target grade faster and more accurately with Cat GRADE technologies. Finish jobs in fewer passes and with less operator effort, saving you time and helping to increase profit.
- Product Link™ collects machine data that can be viewed online through web and mobile applications (optional attachment).
- Access information anytime, anywhere with Vision Link®– use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your jobsite.
- Shorten the learning curve for inexperienced operators with Load Assist (optional attachment).
- EXECUTE EFFICIENCY
-
EXECUTE EFFICIENCY
- The new tractor hydraulic on-demand fan helps assist in lower fuel consumption.
- The Cat C13 tractor engine emits equivalent to U.S. EPA Tier 2 and EU Stage II and U.S. EPA Tier 3 and EU Stage IIIA, contributing to lower fuel .
- Using draft-arm overflow guards diverts material away from the bowl, preventing material from getting caught between the draft arms and the bowl sides.
- Cat Grade Control (optional attachment) intelligently ensures the machine does not cut below grade in a cut area or overfill in the fill area.
Specifications
Full Specifications
- General
-
Overall Length
45.18 ftMaximum Depth of Spread
18.3 inTop Speed - Loaded
33.5 mile/hFuel Tank Refill Capacity - Scraper
201.0 gal (US)Width - Cut
10.3 ftOverall Width
11.71 ftNumber of Flights
15Tires - Scraper
33.25R29**E3Maximum Floor Opening
4.4 ftMaximum Depth of Cut
10.3 inElevator Flight Spacing
20.0 inRated Load
25 038 kg (55,200 lb); 25.1 tonnes (27.6 tons)Overall Shipping Height
12.37 ftScraper Capacity - Struck
18.8 yd³Tires - Tractor Drive
33.25R29**E3Scraper Capacity - Heaped
23.0 yd³180° Curb-to-Curb Turning Width
38.71 ftOperating Weight - Empty
88061.0 lb
- Engine
-
Flywheel Power - Tractor/Scraper
304 kW (407 hp)Rated Engine RPM
2000.0 r/minEngine Model
Cat C13Flywheel Power - Tractor
407.0 HPNote
C13 engine emits equivalent to U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage III.
- Transmission
-
Top Speed - Loaded
33.5 mile/h
- Scraper Bowl
-
Scraper Capacity - Heaped
23.0 yd³
- Service Refill Capacities
-
Fuel Tank
216.09 gal (US)Crankcase
8.08 gal (US)Cooling System
11.89 gal (US)Transmission System
24.76 gal (US)Hydraulic System
21.926 gal (US)
- Dimensions
-
Height - Overall Shipping
158.9 inLength - Overall Machine
542.0 inWidth - Overall Machine
141.1 inHeight - Top of Cab
142.6 inHeight - Scraper Blade Maximum
20.5 inWidth - Tractor
133.1 inWidth - Inside of Bowl
120.0 inWidth - Outside Rear Tires
128.9 inFront of Tractor to Front Axle
122.8 inWheel Base
329.5 inRear Axle - Rear of Machine
89.7 inGround Clearance - Tractor
21.9 inHeight - Top of Elevator
148.3 inWidth - Overall Machine - Ladder Down
149.2 inWidth - Rear Tire Centers
90.2 inAxle to Vertical Hitch Pin
17.0 in
- Cab
-
Exterior Sound Level
The exterior sound power level for the standard machine (ISO 6393) is 111.5 dB(A).ROPS/FOPS
Meets ISO standards
- Safety Criteria Compliance Standards
-
Falling Object Protective Structure (FOPS)
ISO 3449:2005 Level IIReverse Alarm
ISO 9533:2010Brakes
ISO 3450:2011Seat Belt
SAE J386:JUN1985Rollover Protection Structure (ROPS)
ISO 3471:2008 for up to 17 084 kg (37,664 lb)Steering System
ISO 5010:2007
- Travel Speeds - Runout
-
Transmission Gear - Third
7.5 mile/hTransmission Gear - Fifth
13.6 mile/hTransmission Gear - Sixth
18.4 mile/hTransmission Gear - Seventh
24.8 mile/hTransmission Gear - First
3.1 mile/hTransmission Gear - Fourth
10.1 mile/hTransmission Gear - Reverse
5.7 mile/hTransmission Gear - Eighth
33.5 mile/hTransmission Gear - Second
5.5 mile/h
- Implement Cycle Times
-
Ejector Extend
6.45 sBowl Lower
3.5 sBowl Raise
3.0 sEjector Retract
9.7 s
Equipment
- Standard Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
POWER TRAIN - TRACTOR
- Cat C13
- Cat engine brake
- Electric start, 24 Volt
- Air cleaner, dry type with precleaner
- Fan, hydraulic
- Ground level engine shutdown
- Radiator, aluminum unit core, 9 fins per inch
- Guard, crankcase
- Muffler (only for less or non-regulated regions engine arrangement only)
- Starting aid, ether
BRAKING SYSTEM
- Primary and secondary, wet disc, hydraulic
- Parking , hydraulic released, spring applied
- Primary and secondary, wet disc, hydraulic
- Throttle lock
TRANSMISSION
- Guard, power train
- Programmable top gear selection
- Differential lock
- Transmission hold
- APECS software
- ECPC control
- Ground speed control
- 8-speed planetary power shift
- Machine speed limit
- Differential lock protection
- Standard tire spin reduction
ELECTRICAL - TRACTOR
- Alternator, 150 Amp
- Batteries (4), 12V, 1,000 CCA, maintenance free, high output
- Electrical system, 24V
- Starting/charging receptacle
LIGHTING SYSTEM - TRACTOR
- Headlights, halogen
- LED Floodlights
- Turn Signals with hazard Function
- Cutting Edge (2)
- Bowl (1)
- Halogen sdie vision (2)
ELECTRICAL - SCRAPER
- Alarm, backup
LIGHTING SYSTEM - SCRAPER
- Brake lights, LED
- Trun signals with hazard function, LED
OPERATOR ENVIRONMENT - TRACTOR
- HVAC system, heat, AC, defrost
- Thermostat control of HVAC system
- Coat hook
- Lunchbox platform with holding strap
- Diagnostic connection (2)
- 12V power ports (2)
- Differential lock (1)
- Dome courtesy light
- Horn, electric
- T-Handle implement control
- Mirror, rearview
- Radio ready
- ROPS/FOPS cab, pressurized
- Seat belt, static two-piece
- Seat, Cat Advanced Ride Management (ARM), Cat Comfort Series 3, rotates 30 degrees
- Steering wheel, tilt, telescoping, padded
- Windows, right side emergency egress
- Windows, sliding
- Windows, laminated, zipped in
- Windshield wipers, front and rear windows, includes washers
- Door lock
- Messenger Display
KEYPAD SWITCHES
- Hazard lights
- Wipers/washers
- Work lights on/off
- Retarding level select
- Information mode on Messenger Display
- Throttle lock
SAFETY TAB ROCKER SWITCHES
- Parking Brake
- Regeneration control
GAUGES, WARNINGS INCLUDE:
- Hydraulic oil temperature
- Ejector auto
- Engine oil temperature
- Regeneration required
- Brake system
- High beam lights
- Bail down
- Transmission hold
- Engine speed, rpm
- Cushion hitch
- Gear selection
- Implement lockout
- Differential lock (1)
- Coolant temperature
- Park brake
- Apron float
- Throttle lock
- Fuel level
- System voltage
- Action lamp
- Secondary steering
FLUIDS
- Extended Life Coolant to -37� C (-34� F)
OTHER STANDARD EQUIPMENT - TRACTOR
- Advanced cushion hitch
- Accumulators (cushion hitch) with Canadian Registration Number (CRN)
- Fast oil change
- Fenders, non-metallic
- Heater, engine coolant 120V
- Rims (2)
- Tow pin, front
- Vandalism locks
- Heater, engine coolant 120V
BOWL
- 13.5 m� (17.6 yd�), struck
- 17.6 m³ (23 yd³), heaped
OTHER STANDARD EQUIPMENT - SCRAPER
- Vandalism locks
- Elevator with 15 flights
- Hydraulic position sensing cylinders (bowl lift and apron)
- Optional Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
STEERING ARRANGEMENTS
- Secondary Steering Arrangement
INTEGRATED TECHNOLOGIES
- Sequence Assist Arrangement
- Product Link
- Cat Grade Control with Load Assist
OTHER ATTACHMENTS
- Camera arrangement - WAVS
- Steering lock - external
- Cab beacon
- Air horn
- Air horn and beacon
- Fender, scraper
- Wiring group
- Year of manufacture plate
WORK LIGHT ATTACHMENTS
- HID work lights
AMBIENT CAPABILITY ARRANGEMENTS
- Cooling, high ambient HRC
- Extended Life Coolant, -50� C (-58� F)
- Cooling, high ambient LRC
- Cooling, low ambient LRC
SERVICE INSTRUCTIONS
- Film arrangement - U.S. (ANSI)
- Film arrangement - International (ISO)